Daiki Axis: Protect x ChangeIndia Get an STP proposal

Home / Water Service & AMC

Water Service & AMC

STP operation and maintenance, service and AMC from the plant’s manufacturer

Installation supervision, scheduled maintenance, IoT-enabled monitoring, spares and consumables within 24 hours, and lifetime care under an annual maintenance contract.

Smart Water service technician maintaining water treatment equipment

Service, operation and maintenance, AMC

An STP is judged in its tenth year,not on the day it is installed

Most STP failures in India are service failures. The plant was sold, handed over and forgotten. We manufacture the plant, so we stay responsible for how it performs.

Stage 1

Site study and sizing

Flow calculation, inlet quality, reuse plan and the norms in your consent.

Stage 2

Manufacture in India

Built and quality-checked in our own factories to Japanese standards.

Stage 3

Installation

Supervised placement, piping and electrical connection.

Stage 4

Commissioning

Start-up, performance check and training for your facility team.

Stage 5

Inspection and AMC

Scheduled visits, water quality checks, blower service and desludging advice.

Stage 6

Parts and upgrades

Genuine spares from the manufacturer, and added modules when you grow.

The Japanese rule we localized to India

In Japan, the law requires every Johkasou to be maintained and inspected on a schedule by qualified technicians. That is why millions of small plants there keep working for decades.

We apply the same practice to every plant we install in India, and we train students and local technicians to operate and maintain Johkasou systems.

  • One company accountable for design, manufacture, installation and service
  • Annual maintenance contracts (AMC) and full operation and maintenance (O&M) contracts
  • Service records and inspection reports you can show your Pollution Control Board
  • Original parts from the factories that built your plant
  • A parent company with more than 60 years in water treatment behind every contract

Johkasou and domestic sewage

What a maintenance contract covers: 10 kinds of work

For Johkasou STPs at homes, apartments, shops, hotels, schools and hospitals. Small household units need a visiting inspection. Larger sites add day-to-day operation.

Two technicians in helmets taking a water sample at a treatment plant during an inspection
Water sampling during a scheduled inspection.
  1. 01
    Scheduled inspectionEach chamber, inflow and outflow, water level, leaks, damage, odour, noise and alarms.
  2. 02
    Mechanical and electrical checksBlowers, pumps, diffusers, air lifts, float switches and control panels.
  3. 03
    Water quality checkspH, dissolved oxygen, transparency, residual chlorine and sludge levels. Sampling and lab analysis when needed.
  4. 04
    Process adjustmentAir flow, recirculation, transfer rates and timer settings. Backwashing of filter media.
  5. 05
    Disinfectant and consumablesRefilling disinfectant, checking the chlorinator, and replacing blower filters and diaphragms.
  6. 06
    Cleaning and desludgingRemoving sludge and scum, washing the tank and fittings, then refilling and checking.
  7. 07
    Repairs and emergenciesBlower stops, pump failures, blocked pipes, overflow, odour and alarms: find the cause and restore operation.
  8. 08
    Inspection and compliance supportScheduling with the inspecting authority, preparing maintenance and cleaning records, and closing any findings.
  9. 09
    Reports and user guidanceA report after each visit, advice on cleaning and repairs, and guidance on keeping detergent, oil and solids out of the plant.
  10. 10
    Refurbishment and upgradesReplacing old blowers, pumps and panels, repairing tanks, saving energy and adapting to a change in users or load.

Industrial wastewater

ETP operation and maintenance: 14 kinds of work

Factory wastewater changes with the product, the production volume, the cleaning chemicals and the working hours. We adjust operation to the wastewater, and choose the work below to suit the treatment process installed.

  1. 01
    Plant operationResident or visiting operators for start-up and shutdown, daily checks, flow and level control, and the operating log.
  2. 02
    Inflow and load controlTracking flow, pH, organics and oil. Separating strong wastewater and levelling the load in the equalisation tank.
  3. 03
    Sampling and analysisRaw and treated water sampling. pH, BOD, COD, SS, nitrogen, phosphorus, oil and target substances, with results reviewed.
  4. 04
    Biological treatmentAeration, dissolved oxygen, sludge concentration, return and excess sludge. Response to foaming, bulking and low activity.
  5. 05
    Physico-chemical treatmentNeutralisation, coagulation and settling, dissolved air flotation. Chemical selection, dosing, pH control and jar tests.
  6. 06
    Membrane and advanced treatmentMBR, UF and RO pressure, flow and trans-membrane pressure. Membrane cleaning and replacement, carbon and resin care.
  7. 07
    Mechanical, electrical, instrumentsPumps, blowers, mixers, dewatering units, dosing systems, valves and panels. Cleaning and calibration of pH, DO and flow meters.
  8. 08
    Chemicals and consumablesSupply and stock of neutralisers, coagulants, nutrients, antifoam and membrane cleaners. Dosing pump and line care.
  9. 09
    Sludge handlingWithdrawal, thickening and dewatering, tracking volume and moisture, and coordination with haulers and disposal sites.
  10. 10
    Remote monitoring and responseWatching operating data and alarms, night and holiday alerts, site call-out, root-cause analysis and prevention.
  11. 11
    Discharge compliance supportMonitoring plans to the applicable standard, organised lab results and records, and support for reports and inspections.
  12. 12
    Production changes and shutdownsAssessing new products, raw materials and cleaning agents. Shutdown maintenance and restart after long stops.
  13. 13
    Improvement and cost reductionLower power, chemical and sludge costs. Better capacity and stability, and more treated water reused.
  14. 14
    Operating organisationOperating and emergency procedures, operator training, maintenance plans, spares, monthly reports and review meetings.

Five commitments from Daiki Axis

What we promise every customer

  1. No compromise on product qualityFor any manufacturing error we take responsibility and repair or replace 100%.
  2. Continuous improvementWe keep testing new materials, processes and technologies, and develop models suited to India.
  3. Quality control of installationWe supervise installation and visit the site for an installation quality check.
  4. Quick service and spares within 24 hoursService support and spare parts supply through Daiki Axis and its partner network.
  5. Quality maintenance and lifetime careLifetime maintenance for your plant under an AMC contract.

Smart Water by Daiki Axis

Maintenance for any STP or WWTP, not only ours

Smart Water is our maintenance service for sewage treatment plants and wastewater treatment plants at hotels, office buildings, commercial facilities and factories.

  • Inspection: regular inspections and system checks to prevent problems.
  • Operation and maintenance: routine servicing that keeps performance at its best.
  • Repairs and troubleshooting: quick response for any system problem.

Equipment covered includes STP and WWTP units, screens and grit chambers, piping and valves, pumps and blowers, and control panels and electrical equipment.

Why maintenance decides whether an STP works

In Japan, more than 90% of decentralised treatment plants are under regular maintenance, because the law requires it. In India the share is far lower, and that is the main reason installed STPs stop performing.

IoT-enabled online monitoring

Our online monitoring system shows flow, treated-water quality, alarms and energy use for each plant, on a computer or a phone. The site service team uses it for preventive maintenance and for quick troubleshooting.

Designed and made in-house. Daiki Axis designs and builds both the monitoring software and the circuit board in the on-site unit.

Smart Water online monitoring dashboard for a Johkasou plant, shown on a laptop and a phone, with flow, water quality and alarms
The Smart Water online monitoring dashboard, on a computer and on a phone.

A national partner network

Daiki Axis India works with 24 sales and service partner companies across India, so a trained technician is close to your site.

Training for operators

Our education programme trains water treatment operators, and it is open to people from across the water industry, not only our own staff.

Use the STP capacity calculator, then talk to an engineer.

Get an STP proposal

Quick STP sizing calculation · STP capacity calculator

How large an STP does your site need?

Recommended STP capacity

0 KLD

Estimated sewage flow

0 KLD

This is a first estimate from typical planning values. The pollution concentration factor is fixed by site type: 1.0 for most buildings, 1.5 for factories and 2.0 for restaurants. You can change the other numbers. Final sizing follows your local bye-laws, consent conditions and a site study by our engineers.

Note: Cold regions may need a different calculation.

Send this estimate on WhatsApp
WhatsApp us