Daiki Axis: Protect x ChangeIndia Get an STP proposal

Home / FAQ

Frequently asked questions

STP and JohkasouQuestion & Answer

Capacity, cost, compliance, installation and maintenance. If your question is not here, ask our engineers.

Frequently asked questions

Questionswe answer every week

What is a Johkasou STP?

A Johkasou is a factory-built, packaged sewage treatment plant developed in Japan. The name joins johka (purification) and sou (tank). It treats toilet, kitchen and bathroom wastewater at the place where it is generated, inside a single FRP tank, using anaerobic and aerobic biological treatment, settling and disinfection. The treated water can be reused on site for flushing, gardening and similar uses.

How does a sewage treatment plant (STP) work?

A sewage treatment plant removes solids, organic matter and germs from wastewater in stages. Solids settle first. Microorganisms then break down the dissolved organic matter, first without air (anaerobic) and then with air (aerobic). The cleaned water is separated from the biological sludge and disinfected. A Johkasou packaged STP does all of these steps inside one FRP tank.

What is a packaged STP?

A packaged STP, also called a prefabricated or modular sewage treatment plant, is built and tested in a factory and delivered to the site as a finished unit. It needs little civil work, installs in days, and can be placed underground or above ground. Daiki Axis Johkasou is a compact FRP packaged STP available from 1 KLD upwards.

What is a decentralised STP, and why does India need it?

A decentralised STP treats sewage at or near its source instead of carrying it through long sewer lines to a large central plant. India generates more than 72 billion litres of sewage every day and central treatment capacity does not cover it. Decentralised plants suit apartments, campuses, industrial sites, small towns and hilly areas where sewer networks are missing or overloaded, and they reduce the load on central plants in dense cities.

Who is the largest manufacturer of Johkasou decentralised STPs?

Daiki Axis Co., Ltd. of Japan is the world's largest Johkasou manufacturer. It produces about 1 lakh (100,000) units a year and has installed more than 20 lakh (2 million) units worldwide since the company began in 1958. Daiki Axis India Pvt. Ltd. is its wholly owned subsidiary and has installed more than 2,000 decentralised sewage and wastewater treatment plants across India.

Does a Daiki Axis Johkasou STP meet CPCB and NGT norms?

Yes. Daiki Axis Johkasou models are designed for treated-water BOD of 20 mg/L (AI model), 10 mg/L (AJ and AA models) and 5 mg/L (AM and MR membrane models). The AI model meets the CPCB standard on its own. With a sand filter added, it also meets the NGT guideline. In a 2022 performance test with IIT Roorkee, an India-made AJ model averaged 8.6 mg/L BOD and 4.8 mg/L total nitrogen at the outlet. We select the model against the conditions in your consent.

What capacities are available?

Capsule type Johkasou tanks cover 1 to 25 KLD and cylinder type tanks cover 20 to 75 KLD per unit. Units combine in parallel for larger flows. Daiki Axis India has delivered multi-module plants of 100 KLD for railway stations, 500 to 800 KLD for river-cleaning projects and up to 3,600 KLD for construction sites.

How much does an STP cost in India?

STP cost depends on capacity in KLD, the quality of incoming sewage, the reuse standard you need, underground or above-ground installation, and the civil work on site. Compare life-cycle cost, not only purchase price. For a 50 KLD plant, a Johkasou draws about 0.74 kW against about 6 kW for a conventional MBBR plant and needs no full-time operator, so the running-cost gap over 10 years is far larger than any difference in purchase price. Send us your site details for a sized proposal.

How do I calculate the STP capacity I need?

Multiply the number of users by daily water use per person, then take about 80 percent of that as sewage. For example, 100 flats with 5 people each using 135 litres a day produce about 54,000 litres of sewage, so the building needs an STP of roughly 54 KLD. Kitchens, canteens and restaurants need extra allowance because the sewage is stronger. Our online Quick STP sizing calculation gives a first estimate, and final sizing follows your local bye-laws and consent conditions.

How long does it take to install a packaged STP?

A Johkasou arrives as a finished tank, so installation takes days instead of the months needed to build a concrete STP. A small unit can be placed in one day. For construction camps, tanks are dispatched from the factory in 2 to 3 days, installed in 2 to 3 days and biologically commissioned in 10 to 14 days, so the plant is in full operation within about 20 days.

Does a Johkasou STP need a full-time operator?

No. A Johkasou runs automatically and does not need a full-time operator. Routine maintenance takes about 15 minutes a month, with periodic desludging. Daiki Axis India and its service partners provide this under a service or annual maintenance contract.

What after-sales service and AMC does Daiki Axis India provide?

Daiki Axis India supports each plant through installation supervision, a quality check visit, commissioning, training for the facility team, scheduled inspections, water quality checks, blower servicing, desludging advice and spare parts supplied within 24 hours. Lifetime maintenance is available under an annual maintenance contract (AMC), and full operation and maintenance (O&M) contracts are available for larger plants.

What is an MBR Johkasou?

An MBR Johkasou adds membrane treatment inside the FRP tank for the highest reuse standards, with design outflow of BOD 5 mg/L and suspended solids 5 to 10 mg/L. Daiki Axis uses its own 0.4 micron membrane and offers a membrane exchange and factory-cleaning service that can extend membrane life from 4 to 5 years to 8 to 10 years.

Where can treated water from the STP be reused?

Treated water from a Johkasou STP is reused for non-drinking purposes such as toilet flushing, gardening and landscaping, vehicle washing, construction, dust control and cooling tower make-up. About three in four Daiki Axis customers in India install their plant mainly to reuse water.

Can a Johkasou be installed underground or in an existing building?

Yes. Johkasou tanks can be installed above ground, under a car park or driveway, or under a garden. Underground plants leave the surface free for parking or landscaping. Because the tank is prefabricated and compact, it is also used to replace or supplement failed conventional STPs in existing buildings.

Which STP technology is best: SBR, MBBR, MBR or Johkasou?

It depends on the treated-water quality you need and how much operation you can support. At 50 KLD, Daiki Axis estimates treated-water BOD of 30 to 50 mg/L for SBR, 20 to 30 mg/L for MBBR, 1 to 5 mg/L for MBR and 10 to 20 mg/L for a standard Johkasou. SBR, MBBR and MBR plants need one to three operators. A Johkasou needs none and draws about 0.74 kW. For the highest reuse standards, an MBR Johkasou combines membrane quality with packaged operation.

What is the lifespan of a sewage treatment plant?

The life of an STP depends on its material and its maintenance. A Johkasou tank is made of FRP, which does not rust or corrode, and its only regular replacement item is the air blower. Daiki Axis offers lifetime maintenance for its plants under an annual maintenance contract.

Can a failed civil STP be replaced or revamped with a packaged STP?

Yes. Many site-built concrete STPs in apartments and commercial buildings stop meeting norms because of operator, power or equipment problems. Prefabricated Johkasou tanks can replace the failed plant or run beside it. Because the tanks arrive finished, the changeover takes days, not months.

What is the difference between an STP and an ETP?

A sewage treatment plant (STP) treats domestic wastewater from toilets, kitchens and bathrooms. An effluent treatment plant (ETP) treats industrial process wastewater, which can contain chemicals, oils or metals and needs a process designed for that industry. Daiki Axis Johkasou is an STP. At factories it treats the domestic sewage from toilets, canteens and showers.

Where are Daiki Axis Johkasou STPs manufactured?

Johkasou plants for India are manufactured in India by Daiki Axis Environment Pvt. Ltd. at factories in Vadodara, Gujarat and Palwal, Haryana. About 95 percent of each plant is made locally. A third factory is under construction in Tumakuru, Karnataka.

Use the STP capacity calculator, then talk to an engineer.

Get an STP proposal

Quick STP sizing calculation · STP capacity calculator

How large an STP does your site need?

Recommended STP capacity

0 KLD

Estimated sewage flow

0 KLD

This is a first estimate from typical planning values. The pollution concentration factor is fixed by site type: 1.0 for most buildings, 1.5 for factories and 2.0 for restaurants. You can change the other numbers. Final sizing follows your local bye-laws, consent conditions and a site study by our engineers.

Note: Cold regions may need a different calculation.

Send this estimate on WhatsApp
WhatsApp us