Daiki Axis: Protect x ChangeIndia Get an STP proposal
Humpback whales swimming in clear blue ocean water

PROTECT × CHANGE

We can change the futurewhile protecting it.
About Daiki Axis
Waterfall flowing over rock in a green forest

Environmental Equipment

Returning clean water to the earth.Daiki Axis innovation in sewage treatment.
See Johkasou STP
Smart Water by Daiki Axis service technician maintaining water treatment equipment
Smart Water service by Daiki Axis

Water problems? Solved by the pros.

STP and WWTP maintenance: inspection, operation, repairs.24/7, 365 days support.
Service and maintenance
Hands washing fresh lettuce under a kitchen tap with clean running water

Purification
Entire Home Water

Whole-house water purification.Good health, Good beauty from Good water.
Contact us

Sewage treatment plant manufacturer · Prefabricated FRP packaged STP · Made in India

Decentralised STP for India, from the world’s largest Johkasou manufacturer

Daiki Axis India is a sewage treatment plant manufacturer in India. We build Japanese Johkasou prefabricated FRP packaged STP plants at our factories in Vadodara, Gujarat and Palwal, Haryana. Each plant treats sewage where it is generated, returns water you can reuse, and stays under our care for as long as it runs.

1958Daiki Axis founded in Matsuyama, Japan. Listed on the Tokyo Stock Exchange.
20 LakhsJohkasou plants installed worldwide by the group (over 20 Lakhs), with 1 lakh more produced every year.
2,000+Decentralised sewage and wastewater treatment plants installed across India.
2 + 1Factories in India: Vadodara, Gujarat and Palwal, Haryana. A third is under construction in Tumakuru, Karnataka.

What is a Johkasou STP?

A complete sewage treatment plant, built in a factory and delivered as one tank

A Johkasou is a packaged sewage treatment plant developed in Japan. It treats toilet, kitchen and bathroom wastewater at the place where it is generated, inside a single fibre-reinforced plastic (FRP) tank, and returns water that can be reused on site.

This is decentralised sewage treatment. India generates more than 72 billion litres of sewage every day, and sewer networks and central plants do not reach much of it. A Johkasou needs no sewer line. It goes under a car park, a lawn or a service yard and starts working as soon as it is commissioned.

In Japan, Johkasou manufacturing, installation, maintenance and desludging are regulated by a dedicated law, the Johkasou Act. Daiki Axis has built these plants under that discipline for decades and now manufactures them in India.

The treatment sequence

  1. Solids separation in AnoxicIncoming sewage slows down. Solids settle and are held for periodic desludging.
  2. Anaerobic Treatment by AFBRMicroorganisms on filter media break down organic matter without air and without power.
  3. Aerobic Treatment by MBBRA small air blower feeds biofilm carriers that remove the remaining organic load.
  4. Settling in AnoxicBiological solids settle out. Clear water moves on to disinfection.
  5. DisinfectionWater is disinfected and leaves the tank ready for reuse or safe discharge.
  6. Re-circulation for equalizationPart of the flow returns from the settling chamber to the first chamber. This evens out peak loads and keeps treatment stable.

Johkasou technology, test results and cost comparison →

Products and services

Four ways Daiki Axistreats water environment in India

Wastewater, Toilet sewage, Home tap water and the service that keeps every plant working.

Wastewater treatment
- 1 KLD upward

Johkasou-STP

Prefabricated FRP packaged sewage treatment plants for homes, apartments, hotels, hospitals, industries and public projects. Treats all domestic wastewater for reuse.

Johkasou-STP models and capacities →

Black water · toilets only

HPBD-Vikasa

High-Performance Bio-Digester made under licence from DRDO. Treats toilet wastewater where there is no sewer. Five sizes, for 5 to 50 users.

HPBD-Vikasa bio-digester →

Purify up to drinking level

CCIP water purification

Carbon Capacitive Ionized Purification: patented capacitive de-ionisation (CDI) without reverse osmosis. About 80% less energy than RO and more than 80% water recovery.

CCIP water purification →

Service

Water Service & AMC

Installation supervision, operation and maintenance, annual maintenance contracts, IoT monitoring and Smart Water service for any STP or WWTP.

Water Service and AMC →

Where Johkasou STPs are installed

One technology for every sitethat generates domestic sewage

Apartments and housing societies

STP for residential buildings, with treated water for flushing and gardens.

Hotels and resorts

Odour-free, silent plants that sit below ground, away from guests.

Hospitals and clinics

Reliable treatment where a plant failure is a compliance and hygiene risk.

Schools and universities

Campus plants that handle term-time peaks and holiday lows.

Factories and industrial parks

Domestic sewage from canteens, toilets and workers’ housing.

Commercial buildings and IT parks

Water reuse that cuts freshwater demand for flushing and cooling.

Railway stations and public facilities

Fast-install plants for high-footfall public infrastructure.

Villages, hill towns and river towns

Sewage treatment for places a sewer network will not reach.

STP guidance for each type of site →

Treat only what you reuse

Produce water resource from wastewater

In a city with a public sewer, a building does not have to treat all of its sewage. Take an apartment complex that generates 100 KLD. If it wants 20 KLD for flushing and gardening, a 20 KLD plant is enough. The rest goes to the Public Drain as before.

That plant cuts the water the society buys from the municipal supply and from tankers. Treating only the amount you will reuse is the same as producing 20 KLD of new water resource.

Treating all 100 KLD and reusing all of it is also possible. But producing just the amount you need is the most eco-friendly choice. It avoids spending treatment energy on water nobody will use, and it eases the constant pressure to expand centralised STPs.

How much you must treat and reuse depends on your local rules and on the consent conditions for your site. We size the plant to meet them.

Treating only the water you will reuse An apartment complex generates 100 KLD of sewage. 20 KLD goes to a Johkasou STP and returns as reuse water for flushing and gardening. The other 80 KLD goes to the public drain. Apartment complex 100 KLD sewage 20 KLD Johkasou STP 20 KLD Reuse water: flushing and gardening 80 KLD Public Drain = 20 KLD of new water resource
Example: a 100 KLD apartment complex that reuses 20 KLD.

Service, operation and maintenance, AMC

An STP is judged in its tenth year,not on the day it is installed

Most STP failures in India are service failures. The plant was sold, handed over and forgotten. We manufacture the plant, so we stay responsible for how it performs.

Stage 1

Site study and sizing

Flow calculation, inlet quality, reuse plan and the norms in your consent.

Stage 2

Manufacture in India

Built and quality-checked in our own factories to Japanese standards.

Stage 3

Installation

Supervised placement, piping and electrical connection.

Stage 4

Commissioning

Start-up, performance check and training for your facility team.

Stage 5

Inspection and AMC

Scheduled visits, water quality checks, blower service and desludging advice.

Stage 6

Parts and upgrades

Genuine spares from the manufacturer, and added modules when you grow.

The Japanese rule we localized to India

In Japan, the law requires every Johkasou to be maintained and inspected on a schedule by qualified technicians. That is why millions of small plants there keep working for decades.

We apply the same practice to every plant we install in India, and we train students and local technicians to operate and maintain Johkasou systems.

  • One company accountable for design, manufacture, installation and service
  • Annual maintenance contracts (AMC) and full operation and maintenance (O&M) contracts
  • Service records and inspection reports you can show your Pollution Control Board
  • Original parts from the factories that built your plant
  • A parent company with more than 60 years in water treatment behind every contract

Service, AMC and our five commitments →

Track record

Six decades of Johkasou in Japan.More than 2,000 plantsin India since 2018.

  1. Daiki Axis begins in Matsuyama, Ehime, Japan.
  2. Daiki Axis India Pvt. Ltd. is incorporated, after a first market survey and installations from 2017.
  3. First Johkasou factory starts production in Vapi, Gujarat under Make in India. The sales and service partner system begins.
  4. Johkasou becomes the first sewage treatment product in India to receive the CII GreenPro Ecolabel. Daiki Axis India wins the FICCI Water Award for Innovation in Water Technology and receives a recommendation from the Ministry of Jal Shakti.
  5. India and Japan sign a Memorandum of Cooperation on decentralised wastewater management using Johkasou technology.
  6. Second factory opens in Palwal, Haryana, inaugurated by the Chief Minister of Haryana. Capacity: 1,000 Johkasou units a year.
  7. The Gujarat factory moves to a larger site in Vadodara. Daiki Axis signs a memorandum of understanding with the Government of Karnataka on decentralised packaged STPs.
  8. Third factory under construction in Tumakuru, Karnataka, to serve South India.

River rejuvenation

Namami Gange, Uttarakhand

Daiki Axis India is the technology provider for Johkasou STPs under the Government of India’s programme to clean the Ganga, serving towns in hilly areas where sewer networks are not available.

Public infrastructure

Railway and metro stations

100 KLD Johkasou plants at Mumbai Central, Chheoki (Prayagraj) and Sonipat stations, and Johkasou units at more than 60 metro stations in India and Japan.

Recognition

CII GreenPro Ecolabel and FICCI Water Innovation Award

Independent recognition for a sewage treatment product designed for low energy use and water reuse.

Projects, test results and customer feedback →

Frequently asked questions

STP questionswe answer every week

Q&ASTP tips from our engineers
Daiki Axis India on YouTubeShort Q&A videos and STP tips.
What is a Johkasou STP?

A Johkasou is a factory-built, packaged sewage treatment plant developed in Japan. The name joins johka (purification) and sou (tank). It treats toilet, kitchen and bathroom wastewater at the place where it is generated, inside a single FRP tank, using anaerobic and aerobic biological treatment, settling and disinfection. The treated water can be reused on site for flushing, gardening and similar uses.

How does a sewage treatment plant (STP) work?

A sewage treatment plant removes solids, organic matter and germs from wastewater in stages. Solids settle first. Microorganisms then break down the dissolved organic matter, first without air (anaerobic) and then with air (aerobic). The cleaned water is separated from the biological sludge and disinfected. A Johkasou packaged STP does all of these steps inside one FRP tank.

What is a packaged STP?

A packaged STP, also called a prefabricated or modular sewage treatment plant, is built and tested in a factory and delivered to the site as a finished unit. It needs little civil work, installs in days, and can be placed underground or above ground. Daiki Axis Johkasou is a compact FRP packaged STP available from 1 KLD upwards.

What is a decentralised STP, and why does India need it?

A decentralised STP treats sewage at or near its source instead of carrying it through long sewer lines to a large central plant. India generates more than 72 billion litres of sewage every day and central treatment capacity does not cover it. Decentralised plants suit apartments, campuses, industrial sites, small towns and hilly areas where sewer networks are missing or overloaded, and they reduce the load on central plants in dense cities.

Who is the largest manufacturer of Johkasou decentralised STPs?

Daiki Axis Co., Ltd. of Japan is the world's largest Johkasou manufacturer. It produces about 1 lakh (100,000) units a year and has installed more than 20 lakh (2 million) units worldwide since the company began in 1958. Daiki Axis India Pvt. Ltd. is its wholly owned subsidiary and has installed more than 2,000 decentralised sewage and wastewater treatment plants across India.

All frequently asked questions →

Talk to an STP engineer

Tell us your site.We will size the plant.

Share the building type, number of users and how you want to reuse the water. Our engineers reply with a capacity recommendation and a proposal.

Sales and service

Phone: +91 80 4639 5000
Email: info.india@daiki-axis.com

Head office

Daiki Axis India Pvt. Ltd.
604 Block-A Vatika Mindscapes, Sector 27D, Faridabad, Haryana, 121003 India

Offices and factories

Offices in Faridabad, Mumbai and Chennai.Factories in Palwal (Haryana) and Vadodara (Gujarat),with a third under construction in Tumakuru (Karnataka).Supplying projects across India.

Quick STP sizing calculation · STP capacity calculator

How large an STP does your site need?

Recommended STP capacity

0 KLD

Estimated sewage flow

0 KLD

This is a first estimate from typical planning values. The pollution concentration factor is fixed by site type: 1.0 for most buildings, 1.5 for factories and 2.0 for restaurants. You can change the other numbers. Final sizing follows your local bye-laws, consent conditions and a site study by our engineers.

Note: Cold regions may need a different calculation.

Send this estimate on WhatsApp
WhatsApp us